VoiceAnnounce 535 Frequently Asked Questions

How do I set the Date & Time?
The date & time are set automatically with every incoming call. There are no provisions to set the clock manually.
Why don't I hear a Caller ID announcement?
Check the volume setting of the unit. Do not assume that the volume is "on" because you hear the unit on review. Refer to your User's Guide which was supplied with this unit or download the correct guide from ClassCo's support website for instructions on setting the volume level.

Check for proper services. Does the caller ID information appear on the display of this unit or any other caller ID enabled devices in the home?

Check for proper installation. Improper installation may cause undesirable operation. Refer to your User's Guide which was supplied with this unit or download the correct guide from ClassCo's support website.
Call Waiting calls are not displayed on the unit when using the phone
The telephone you are using is not connected to the jack marked "PHONE" on the back of the unit. Plug your telephone into the PHONE jack on the unit.
No characters are visible on the display.
Check that the power adapter is plugged into a live outlet. Move the adapter to a different outlet to verify.

Check that the power adapter is firmly connected to the Caller ID unit.

Verify that you are using ONLY the power adapter that was supplied with the unit.
The red LED light is on/blinking.
The LED will stay on solid to indicate the line is in use.

The LED blinks to indicate un-reviewed calls in the call log. Review all calls in the call log.

The LED blinks to indicate the presence of voice mail. Review all new voice mails.

Unplug the power adapter for 5 minutes. Once power is restored the LED should not resume blinking unless one of the above conditions is present.
The Caller ID beeps.
The unit will beep every few seconds to indicate that a new voice mail has been received. Review all new voice mails or deactivate the MSG-BEEP feature in the special features menu. Refer to your User's Guide which was supplied with this unit or download the correct guide from ClassCo's support website.